fluid-contracts-public/deployments/mainnet/solcInputs/16cdef3701bacaec838a5e463408ad5f.json

{
  "language": "Solidity",
  "sources": {
    "@openzeppelin/contracts/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../token/ERC20/IERC20.sol\";\n"
    },
    "@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `from` to `to` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 amount\n    ) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../extensions/draft-IERC20Permit.sol\";\nimport \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    using Address for address;\n\n    function safeTransfer(\n        IERC20 token,\n        address to,\n        uint256 value\n    ) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n    }\n\n    function safeTransferFrom(\n        IERC20 token,\n        address from,\n        address to,\n        uint256 value\n    ) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n    }\n\n    /**\n     * @dev Deprecated. This function has issues similar to the ones found in\n     * {IERC20-approve}, and its usage is discouraged.\n     *\n     * Whenever possible, use {safeIncreaseAllowance} and\n     * {safeDecreaseAllowance} instead.\n     */\n    function safeApprove(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        // safeApprove should only be called when setting an initial allowance,\n        // or when resetting it to zero. To increase and decrease it, use\n        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n        require(\n            (value == 0) || (token.allowance(address(this), spender) == 0),\n            \"SafeERC20: approve from non-zero to non-zero allowance\"\n        );\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n    }\n\n    function safeIncreaseAllowance(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        uint256 newAllowance = token.allowance(address(this), spender) + value;\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    function safeDecreaseAllowance(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        unchecked {\n            uint256 oldAllowance = token.allowance(address(this), spender);\n            require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n            uint256 newAllowance = oldAllowance - value;\n            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n        }\n    }\n\n    function safePermit(\n        IERC20Permit token,\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal {\n        uint256 nonceBefore = token.nonces(owner);\n        token.permit(owner, spender, value, deadline, v, r, s);\n        uint256 nonceAfter = token.nonces(owner);\n        require(nonceAfter == nonceBefore + 1, \"SafeERC20: permit did not succeed\");\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that\n        // the target address contains contract code and also asserts for success in the low-level call.\n\n        bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n        if (returndata.length > 0) {\n            // Return data is optional\n            require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but also transferring `value` wei to `target`.\n     *\n     * Requirements:\n     *\n     * - the calling contract must have an ETH balance of at least `value`.\n     * - the called Solidity function must be `payable`.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value\n    ) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCallWithValue(\n        address target,\n        bytes memory data,\n        uint256 value,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        require(address(this).balance >= value, \"Address: insufficient balance for call\");\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n        return functionStaticCall(target, data, \"Address: low-level static call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a static call.\n     *\n     * _Available since v3.3._\n     */\n    function functionStaticCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.staticcall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n     * but performing a delegate call.\n     *\n     * _Available since v3.4._\n     */\n    function functionDelegateCall(\n        address target,\n        bytes memory data,\n        string memory errorMessage\n    ) internal returns (bytes memory) {\n        (bool success, bytes memory returndata) = target.delegatecall(data);\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\n    }\n\n    /**\n     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\n     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\n     *\n     * _Available since v4.8._\n     */\n    function verifyCallResultFromTarget(\n        address target,\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal view returns (bytes memory) {\n        if (success) {\n            if (returndata.length == 0) {\n                // only check isContract if the call was successful and the return data is empty\n                // otherwise we already know that it was a contract\n                require(isContract(target), \"Address: call to non-contract\");\n            }\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    /**\n     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\n     * revert reason or using the provided one.\n     *\n     * _Available since v4.3._\n     */\n    function verifyCallResult(\n        bool success,\n        bytes memory returndata,\n        string memory errorMessage\n    ) internal pure returns (bytes memory) {\n        if (success) {\n            return returndata;\n        } else {\n            _revert(returndata, errorMessage);\n        }\n    }\n\n    function _revert(bytes memory returndata, string memory errorMessage) private pure {\n        // Look for revert reason and bubble it up if present\n        if (returndata.length > 0) {\n            // The easiest way to bubble the revert reason is using memory via assembly\n            /// @solidity memory-safe-assembly\n            assembly {\n                let returndata_size := mload(returndata)\n                revert(add(32, returndata), returndata_size)\n            }\n        } else {\n            revert(errorMessage);\n        }\n    }\n}\n"
    },
    "contracts/periphery/liquidation/main.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nimport { Owned } from \"solmate/src/auth/Owned.sol\";\n\nimport { IFluidVaultT1 } from \"../../protocols/vault/interfaces/iVaultT1.sol\";\nimport { IERC20 } from \"@openzeppelin/contracts/interfaces/IERC20.sol\";\nimport { SafeERC20 } from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport { IWETH9 } from \"../../protocols/lending/interfaces/external/iWETH9.sol\";\nimport { Address } from \"@openzeppelin/contracts/utils/Address.sol\";\n\ninterface InstaFlashInterface {\n    function flashLoan(address[] memory tokens, uint256[] memory amts, uint route, bytes memory data, bytes memory extraData) external;\n}\n\ninterface InstaFlashReceiverInterface {\n    function executeOperation(\n        address[] calldata assets,\n        uint256[] calldata amounts,\n        uint256[] calldata premiums,\n        address initiator,\n        bytes calldata _data\n    ) external returns (bool);\n}\n\ncontract VaultT1Liquidator is Owned {\n    using SafeERC20 for IERC20;\n\n    address constant public ETH_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;\n\n    InstaFlashInterface immutable public FLA;\n    IWETH9 immutable public WETH;\n\n    mapping (address => bool) public rebalancer; \n\n    error FluidVaultT1Liquidator__InvalidOperation();\n\n    event Liquidated(\n        address indexed vault,\n        uint256 collateral,\n        uint256 debt\n    );\n\n    event Withdraw(\n        address indexed to,\n        address indexed token,\n        uint256 amount\n    );\n\n    event ToggleRebalancer(\n        address indexed rebalancer,\n        bool indexed status\n    );\n\n    struct LiquidationParams {\n        address vault;\n        address supply;\n        address borrow;\n        uint256 supplyAmount;\n        uint256 borrowAmount;\n        uint256 colPerUnitDebt;\n        bool absorb;\n        address swapRouter;\n        address swapApproval;\n        bytes swapData;\n        uint256 route;\n    }\n\n    constructor (\n        address owner_,\n        address fla_,\n        address weth_,\n        address[] memory rebalancers_\n    ) Owned(owner_) {\n        FLA = InstaFlashInterface(fla_);\n        WETH = IWETH9(weth_);\n        for (uint256 i = 0; i < rebalancers_.length; i++) {\n            rebalancer[rebalancers_[i]] = true;\n            emit ToggleRebalancer(rebalancers_[i], true);\n        }\n    }\n\n    modifier isRebalancer() {\n        if (!rebalancer[msg.sender] && msg.sender != owner) {\n            revert FluidVaultT1Liquidator__InvalidOperation();\n        }\n        _;\n    }\n\n    function toggleRebalancer(address rebalancer_, bool status_) public onlyOwner {\n        rebalancer[rebalancer_] = status_;\n        emit ToggleRebalancer(rebalancer_, status_);\n    }\n\n    function spell(address[] memory targets_, bytes[] memory calldatas_) public onlyOwner {\n        for (uint256 i = 0; i < targets_.length; i++) {\n            Address.functionDelegateCall(targets_[i], calldatas_[i]);\n        }\n    }\n\n    function withdraw(address to_, address[] memory tokens_, uint256[] memory amounts_) public onlyOwner {\n        for (uint i = 0; i < tokens_.length; i++) {\n            if (tokens_[i] == ETH_ADDRESS) {\n                Address.sendValue(payable(to_), amounts_[i]);\n            } else {\n                IERC20(tokens_[i]).safeTransfer(to_, amounts_[i]);\n            }\n            emit Withdraw(to_, tokens_[i], amounts_[i]);\n        }\n    }\n    \n    function liquidation(LiquidationParams memory params_) public isRebalancer {\n        address[] memory tokens = new address[](1);\n        uint256[] memory amts = new uint256[](1);\n\n        // Take flashloan in borrow token of the vault\n        tokens[0] = params_.borrow == ETH_ADDRESS ? address(WETH) : params_.borrow;\n        amts[0] = params_.borrowAmount;\n\n        bytes memory data_ = abi.encode(params_);\n\n        FLA.flashLoan(tokens, amts, params_.route, data_, abi.encode());\n\n    }\n\n    function executeOperation(\n        address[] calldata assets,\n        uint256[] calldata amounts,\n        uint256[] calldata premiums,\n        address initiator,\n        bytes calldata _data\n    ) external returns (bool) {\n        if (msg.sender != address(FLA)) revert FluidVaultT1Liquidator__InvalidOperation();\n        if (initiator != address(this)) revert FluidVaultT1Liquidator__InvalidOperation();\n        LiquidationParams memory params_ = abi.decode(_data, (LiquidationParams));\n\n        {\n            uint256 value_;\n            if (params_.borrow != ETH_ADDRESS) {\n                IERC20(params_.borrow).safeApprove(params_.vault, 0);\n                IERC20(params_.borrow).safeApprove(params_.vault, params_.borrowAmount);\n                value_ = 0;\n            } else {\n                WETH.withdraw(params_.borrowAmount);\n                value_ = params_.borrowAmount;\n            }\n\n            (uint256 debtAmount_, uint256 collateralAmount_) = IFluidVaultT1(params_.vault).liquidate{value: value_}(params_.borrowAmount, params_.colPerUnitDebt, address(this), params_.absorb);\n\n            if (params_.supply != ETH_ADDRESS) {\n                IERC20(params_.supply).safeApprove(params_.swapApproval, 0);\n                IERC20(params_.supply).safeApprove(params_.swapApproval, params_.supplyAmount);\n                value_ = 0;\n            } else {\n                value_ = params_.supplyAmount;\n            }\n\n            Address.functionCallWithValue(params_.swapRouter, params_.swapData, value_, \"Swap: failed\");\n            emit Liquidated(params_.vault, collateralAmount_, debtAmount_);\n        }\n\n        uint256 flashloanAmount_ = amounts[0] + premiums[0] + 10;\n        if (params_.borrow == ETH_ADDRESS) {\n            uint256 wethBalance_ = WETH.balanceOf(address(this));\n            if (wethBalance_ < flashloanAmount_) {\n                WETH.deposit{value: flashloanAmount_ - wethBalance_}();\n            }\n        }\n        IERC20(assets[0]).safeTransfer(msg.sender, flashloanAmount_);\n\n        return true;\n    }\n\n    receive() payable external {}\n}"
    },
    "contracts/protocols/lending/interfaces/external/iWETH9.sol": {
      "content": "//SPDX-License-Identifier: MIT\npragma solidity 0.8.21;\n\nimport { IERC20 } from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\n\ninterface IWETH9 is IERC20 {\n    function deposit() external payable;\n\n    function withdraw(uint256 wad) external;\n}\n"
    },
    "contracts/protocols/vault/interfaces/iVaultT1.sol": {
      "content": "//SPDX-License-Identifier: MIT\npragma solidity 0.8.21;\n\ninterface IFluidVaultT1 {\n    /// @notice returns the vault id\n    function VAULT_ID() external view returns (uint256);\n\n    /// @notice reads uint256 data `result_` from storage at a bytes32 storage `slot_` key.\n    function readFromStorage(bytes32 slot_) external view returns (uint256 result_);\n\n    struct ConstantViews {\n        address liquidity;\n        address factory;\n        address adminImplementation;\n        address secondaryImplementation;\n        address supplyToken;\n        address borrowToken;\n        uint8 supplyDecimals;\n        uint8 borrowDecimals;\n        uint vaultId;\n        bytes32 liquiditySupplyExchangePriceSlot;\n        bytes32 liquidityBorrowExchangePriceSlot;\n        bytes32 liquidityUserSupplySlot;\n        bytes32 liquidityUserBorrowSlot;\n    }\n\n    /// @notice returns all Vault constants\n    function constantsView() external view returns (ConstantViews memory constantsView_);\n\n    /// @notice fetches the latest user position after a liquidation\n    function fetchLatestPosition(\n        int256 positionTick_,\n        uint256 positionTickId_,\n        uint256 positionRawDebt_,\n        uint256 tickData_\n    )\n        external\n        view\n        returns (\n            int256, // tick\n            uint256, // raw debt\n            uint256, // raw collateral\n            uint256, // branchID_\n            uint256 // branchData_\n        );\n\n    /// @notice calculates the updated vault exchange prices\n    function updateExchangePrices(\n        uint256 vaultVariables2_\n    )\n        external\n        view\n        returns (\n            uint256 liqSupplyExPrice_,\n            uint256 liqBorrowExPrice_,\n            uint256 vaultSupplyExPrice_,\n            uint256 vaultBorrowExPrice_\n        );\n\n    /// @notice calculates the updated vault exchange prices and writes them to storage\n    function updateExchangePricesOnStorage()\n        external\n        returns (\n            uint256 liqSupplyExPrice_,\n            uint256 liqBorrowExPrice_,\n            uint256 vaultSupplyExPrice_,\n            uint256 vaultBorrowExPrice_\n        );\n\n    /// @notice returns the liquidity contract address\n    function LIQUIDITY() external view returns (address);\n\n    function operate(\n        uint256 nftId_, // if 0 then new position\n        int256 newCol_, // if negative then withdraw\n        int256 newDebt_, // if negative then payback\n        address to_ // address at which the borrow & withdraw amount should go to. If address(0) then it'll go to msg.sender\n    )\n        external\n        payable\n        returns (\n            uint256, // nftId_\n            int256, // final supply amount. if - then withdraw\n            int256 // final borrow amount. if - then payback\n        );\n    \n    function liquidate(\n        uint256 debtAmt_,\n        uint256 colPerUnitDebt_, // min collateral needed per unit of debt in 1e18\n        address to_,\n        bool absorb_\n    ) external payable returns (uint actualDebtAmt_, uint actualColAmt_);\n\n    function absorb() external;\n\n    function rebalance() external payable returns (int supplyAmt_, int borrowAmt_);\n\n    error FluidLiquidateResult(uint256 colLiquidated, uint256 debtLiquidated);\n}\n"
    },
    "solmate/src/auth/Owned.sol": {
      "content": "// SPDX-License-Identifier: AGPL-3.0-only\npragma solidity >=0.8.0;\n\n/// @notice Simple single owner authorization mixin.\n/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Owned.sol)\nabstract contract Owned {\n    /*//////////////////////////////////////////////////////////////\n                                 EVENTS\n    //////////////////////////////////////////////////////////////*/\n\n    event OwnershipTransferred(address indexed user, address indexed newOwner);\n\n    /*//////////////////////////////////////////////////////////////\n                            OWNERSHIP STORAGE\n    //////////////////////////////////////////////////////////////*/\n\n    address public owner;\n\n    modifier onlyOwner() virtual {\n        require(msg.sender == owner, \"UNAUTHORIZED\");\n\n        _;\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                               CONSTRUCTOR\n    //////////////////////////////////////////////////////////////*/\n\n    constructor(address _owner) {\n        owner = _owner;\n\n        emit OwnershipTransferred(address(0), _owner);\n    }\n\n    /*//////////////////////////////////////////////////////////////\n                             OWNERSHIP LOGIC\n    //////////////////////////////////////////////////////////////*/\n\n    function transferOwnership(address newOwner) public virtual onlyOwner {\n        owner = newOwner;\n\n        emit OwnershipTransferred(msg.sender, newOwner);\n    }\n}\n"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 10000000
    },
    "evmVersion": "paris",
    "outputSelection": {
      "*": {
        "*": [
          "abi",
          "evm.bytecode",
          "evm.deployedBytecode",
          "evm.methodIdentifiers",
          "metadata",
          "devdoc",
          "userdoc",
          "storageLayout",
          "evm.gasEstimates"
        ],
        "": [
          "ast"
        ]
      }
    },
    "metadata": {
      "useLiteralContent": true
    }
  }
}