fluid-contracts-public/deployments/mainnet/solcInputs/d26c23b62a1fdd46e6f23782a617d6b1.json

{
  "language": "Solidity",
  "sources": {
    "@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20Permit {\n    /**\n     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n     * given ``owner``'s signed approval.\n     *\n     * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n     * ordering also apply here.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     * - `deadline` must be a timestamp in the future.\n     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n     * over the EIP712-formatted function arguments.\n     * - the signature must use ``owner``'s current nonce (see {nonces}).\n     *\n     * For more information on the signature format, see the\n     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n     * section].\n     */\n    function permit(\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) external;\n\n    /**\n     * @dev Returns the current nonce for `owner`. This value must be\n     * included whenever a signature is generated for {permit}.\n     *\n     * Every successful call to {permit} increases ``owner``'s nonce by one. This\n     * prevents a signature from being used multiple times.\n     */\n    function nonces(address owner) external view returns (uint256);\n\n    /**\n     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n     */\n    // solhint-disable-next-line func-name-mixedcase\n    function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the amount of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the amount of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves `amount` tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 amount) external returns (bool);\n\n    /**\n     * @dev Moves `amount` tokens from `from` to `to` using the\n     * allowance mechanism. `amount` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(\n        address from,\n        address to,\n        uint256 amount\n    ) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../extensions/draft-IERC20Permit.sol\";\nimport \"../../../utils/Address.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    using Address for address;\n\n    function safeTransfer(\n        IERC20 token,\n        address to,\n        uint256 value\n    ) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n    }\n\n    function safeTransferFrom(\n        IERC20 token,\n        address from,\n        address to,\n        uint256 value\n    ) internal {\n        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n    }\n\n    /**\n     * @dev Deprecated. This function has issues similar to the ones found in\n     * {IERC20-approve}, and its usage is discouraged.\n     *\n     * Whenever possible, use {safeIncreaseAllowance} and\n     * {safeDecreaseAllowance} instead.\n     */\n    function safeApprove(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        // safeApprove should only be called when setting an initial allowance,\n        // or when resetting it to zero. To increase and decrease it, use\n        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n        require(\n            (value == 0) || (token.allowance(address(this), spender) == 0),\n            \"SafeERC20: approve from non-zero to non-zero allowance\"\n        );\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n    }\n\n    function safeIncreaseAllowance(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        uint256 newAllowance = token.allowance(address(this), spender) + value;\n        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n    }\n\n    function safeDecreaseAllowance(\n        IERC20 token,\n        address spender,\n        uint256 value\n    ) internal {\n        unchecked {\n            uint256 oldAllowance = token.allowance(address(this), spender);\n            require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n            uint256 newAllowance = oldAllowance - value;\n            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n        }\n    }\n\n    function safePermit(\n        IERC20Permit token,\n        address owner,\n        address spender,\n        uint256 value,\n        uint256 deadline,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    ) internal {\n        uint256 nonceBefore = token.nonces(owner);\n        token.permit(owner, spender, value, deadline, v, r, s);\n        uint256 nonceAfter = token.nonces(owner);\n        require(nonceAfter == nonceBefore + 1, \"SafeERC20: permit did not succeed\");\n    }\n\n    /**\n     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n     * on the return value: the return value is optional (but if data is returned, it must not be false).\n     * @param token The token targeted by the call.\n     * @param data The call data (encoded using abi.encode or one of its variants).\n     */\n    function _callOptionalReturn(IERC20 token, bytes memory data) private {\n        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n        // we're implem
    },
    "@openzeppelin/contracts/utils/Address.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)\n\npragma solidity ^0.8.1;\n\n/**\n * @dev Collection of functions related to the address type\n */\nlibrary Address {\n    /**\n     * @dev Returns true if `account` is a contract.\n     *\n     * [IMPORTANT]\n     * ====\n     * It is unsafe to assume that an address for which this function returns\n     * false is an externally-owned account (EOA) and not a contract.\n     *\n     * Among others, `isContract` will return false for the following\n     * types of addresses:\n     *\n     *  - an externally-owned account\n     *  - a contract in construction\n     *  - an address where a contract will be created\n     *  - an address where a contract lived, but was destroyed\n     * ====\n     *\n     * [IMPORTANT]\n     * ====\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\n     *\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\n     * constructor.\n     * ====\n     */\n    function isContract(address account) internal view returns (bool) {\n        // This method relies on extcodesize/address.code.length, which returns 0\n        // for contracts in construction, since the code is only stored at the end\n        // of the constructor execution.\n\n        return account.code.length > 0;\n    }\n\n    /**\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n     * `recipient`, forwarding all available gas and reverting on errors.\n     *\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\n     * imposed by `transfer`, making them unable to receive funds via\n     * `transfer`. {sendValue} removes this limitation.\n     *\n     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n     *\n     * IMPORTANT: because control is transferred to `recipient`, care must be\n     * taken to not create reentrancy vulnerabilities. Consider using\n     * {ReentrancyGuard} or the\n     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n     */\n    function sendValue(address payable recipient, uint256 amount) internal {\n        require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n        (bool success, ) = recipient.call{value: amount}(\"\");\n        require(success, \"Address: unable to send value, recipient may have reverted\");\n    }\n\n    /**\n     * @dev Performs a Solidity function call using a low level `call`. A\n     * plain `call` is an unsafe replacement for a function call: use this\n     * function instead.\n     *\n     * If `target` reverts with a revert reason, it is bubbled up by this\n     * function (like regular Solidity function calls).\n     *\n     * Returns the raw returned data. To convert to the expected return value,\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n     *\n     * Requirements:\n     *\n     * - `target` must be a contract.\n     * - calling `target` with `data` must not revert.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n        return functionCallWithValue(target, data, 0, \"Address: low-level call failed\");\n    }\n\n    /**\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n     * `errorMessage` as a fallback revert reason when `target` reverts.\n     *\n     * _Available since v3.1._\n     */\n    function functionCall(\n        address target,\n        bytes memory data,\n        string memory err
    },
    "contracts/infiniteProxy/interfaces/iProxy.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.21;\n\ninterface IProxy {\n    function setAdmin(address newAdmin_) external;\n\n    function setDummyImplementation(address newDummyImplementation_) external;\n\n    function addImplementation(address implementation_, bytes4[] calldata sigs_) external;\n\n    function removeImplementation(address implementation_) external;\n\n    function getAdmin() external view returns (address);\n\n    function getDummyImplementation() external view returns (address);\n\n    function getImplementationSigs(address impl_) external view returns (bytes4[] memory);\n\n    function getSigsImplementation(bytes4 sig_) external view returns (address);\n\n    function readFromStorage(bytes32 slot_) external view returns (uint256 result_);\n}\n"
    },
    "contracts/libraries/bigMathMinified.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\n/// @title library that represents a number in BigNumber(coefficient and exponent) format to store in smaller bits.\n/// @notice the number is divided into two parts: a coefficient and an exponent. This comes at a cost of losing some precision\n/// at the end of the number because the exponent simply fills it with zeroes. This precision is oftentimes negligible and can\n/// result in significant gas cost reduction due to storage space reduction.\n/// Also note, a valid big number is as follows: if the exponent is > 0, then coefficient last bits should be occupied to have max precision.\n/// @dev roundUp is more like a increase 1, which happens everytime for the same number.\n/// roundDown simply sets trailing digits after coefficientSize to zero (floor), only once for the same number.\nlibrary BigMathMinified {\n    /// @dev constants to use for `roundUp` input param to increase readability\n    bool internal constant ROUND_DOWN = false;\n    bool internal constant ROUND_UP = true;\n\n    /// @dev converts `normal` number to BigNumber with `exponent` and `coefficient` (or precision).\n    /// e.g.:\n    /// 5035703444687813576399599 (normal) = (coefficient[32bits], exponent[8bits])[40bits]\n    /// 5035703444687813576399599 (decimal) => 10000101010010110100000011111011110010100110100000000011100101001101001101011101111 (binary)\n    ///                                     => 10000101010010110100000011111011000000000000000000000000000000000000000000000000000\n    ///                                                                        ^-------------------- 51(exponent) -------------- ^\n    /// coefficient = 1000,0101,0100,1011,0100,0000,1111,1011               (2236301563)\n    /// exponent =                                            0011,0011     (51)\n    /// bigNumber =   1000,0101,0100,1011,0100,0000,1111,1011,0011,0011     (572493200179)\n    ///\n    /// @param normal number which needs to be converted into Big Number\n    /// @param coefficientSize at max how many bits of precision there should be (64 = uint64 (64 bits precision))\n    /// @param exponentSize at max how many bits of exponent there should be (8 = uint8 (8 bits exponent))\n    /// @param roundUp signals if result should be rounded down or up\n    /// @return bigNumber converted bigNumber (coefficient << exponent)\n    function toBigNumber(\n        uint256 normal,\n        uint256 coefficientSize,\n        uint256 exponentSize,\n        bool roundUp\n    ) internal pure returns (uint256 bigNumber) {\n        assembly {\n            let lastBit_\n            let number_ := normal\n            if gt(number_, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF) {\n                number_ := shr(0x80, number_)\n                lastBit_ := 0x80\n            }\n            if gt(number_, 0xFFFFFFFFFFFFFFFF) {\n                number_ := shr(0x40, number_)\n                lastBit_ := add(lastBit_, 0x40)\n            }\n            if gt(number_, 0xFFFFFFFF) {\n                number_ := shr(0x20, number_)\n                lastBit_ := add(lastBit_, 0x20)\n            }\n            if gt(number_, 0xFFFF) {\n                number_ := shr(0x10, number_)\n                lastBit_ := add(lastBit_, 0x10)\n            }\n            if gt(number_, 0xFF) {\n                number_ := shr(0x8, number_)\n                lastBit_ := add(lastBit_, 0x8)\n            }\n            if gt(number_, 0xF) {\n                number_ := shr(0x4, number_)\n                lastBit_ := add(lastBit_, 0x4)\n            }\n            if gt(number_, 0x3) {\n                number_ := shr(0x2, number_)\n                lastBit_ := add(lastBit_, 0x2)\n            }\n            if gt(number_, 0x1) {\n                lastBit_ := add(lastBit_, 1)\n            }\n            if gt(number_, 0) {\n                lastBit_ := add(lastBit_, 1)\n            }\n            if lt(lastBit_, coefficientSize) {\n                // for throw exception\n                lastBit_ := coefficientSize\n            }\n            let
    },
    "contracts/libraries/liquiditySlotsLink.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\n/// @notice library that helps in reading / working with storage slot data of Fluid Liquidity.\n/// @dev as all data for Fluid Liquidity is internal, any data must be fetched directly through manual\n/// slot reading through this library or, if gas usage is less important, through the FluidLiquidityResolver.\nlibrary LiquiditySlotsLink {\n    /// @dev storage slot for status at Liquidity\n    uint256 internal constant LIQUIDITY_STATUS_SLOT = 1;\n    /// @dev storage slot for auths mapping at Liquidity\n    uint256 internal constant LIQUIDITY_AUTHS_MAPPING_SLOT = 2;\n    /// @dev storage slot for guardians mapping at Liquidity\n    uint256 internal constant LIQUIDITY_GUARDIANS_MAPPING_SLOT = 3;\n    /// @dev storage slot for user class mapping at Liquidity\n    uint256 internal constant LIQUIDITY_USER_CLASS_MAPPING_SLOT = 4;\n    /// @dev storage slot for exchangePricesAndConfig mapping at Liquidity\n    uint256 internal constant LIQUIDITY_EXCHANGE_PRICES_MAPPING_SLOT = 5;\n    /// @dev storage slot for rateData mapping at Liquidity\n    uint256 internal constant LIQUIDITY_RATE_DATA_MAPPING_SLOT = 6;\n    /// @dev storage slot for totalAmounts mapping at Liquidity\n    uint256 internal constant LIQUIDITY_TOTAL_AMOUNTS_MAPPING_SLOT = 7;\n    /// @dev storage slot for user supply double mapping at Liquidity\n    uint256 internal constant LIQUIDITY_USER_SUPPLY_DOUBLE_MAPPING_SLOT = 8;\n    /// @dev storage slot for user borrow double mapping at Liquidity\n    uint256 internal constant LIQUIDITY_USER_BORROW_DOUBLE_MAPPING_SLOT = 9;\n    /// @dev storage slot for listed tokens array at Liquidity\n    uint256 internal constant LIQUIDITY_LISTED_TOKENS_ARRAY_SLOT = 10;\n\n    // --------------------------------\n    // @dev stacked uint256 storage slots bits position data for each:\n\n    // ExchangePricesAndConfig\n    uint256 internal constant BITS_EXCHANGE_PRICES_BORROW_RATE = 0;\n    uint256 internal constant BITS_EXCHANGE_PRICES_FEE = 16;\n    uint256 internal constant BITS_EXCHANGE_PRICES_UTILIZATION = 30;\n    uint256 internal constant BITS_EXCHANGE_PRICES_UPDATE_THRESHOLD = 44;\n    uint256 internal constant BITS_EXCHANGE_PRICES_LAST_TIMESTAMP = 58;\n    uint256 internal constant BITS_EXCHANGE_PRICES_SUPPLY_EXCHANGE_PRICE = 91;\n    uint256 internal constant BITS_EXCHANGE_PRICES_BORROW_EXCHANGE_PRICE = 155;\n    uint256 internal constant BITS_EXCHANGE_PRICES_SUPPLY_RATIO = 219;\n    uint256 internal constant BITS_EXCHANGE_PRICES_BORROW_RATIO = 234;\n\n    // RateData:\n    uint256 internal constant BITS_RATE_DATA_VERSION = 0;\n    // RateData: V1\n    uint256 internal constant BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_ZERO = 4;\n    uint256 internal constant BITS_RATE_DATA_V1_UTILIZATION_AT_KINK = 20;\n    uint256 internal constant BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_KINK = 36;\n    uint256 internal constant BITS_RATE_DATA_V1_RATE_AT_UTILIZATION_MAX = 52;\n    // RateData: V2\n    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_ZERO = 4;\n    uint256 internal constant BITS_RATE_DATA_V2_UTILIZATION_AT_KINK1 = 20;\n    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK1 = 36;\n    uint256 internal constant BITS_RATE_DATA_V2_UTILIZATION_AT_KINK2 = 52;\n    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_KINK2 = 68;\n    uint256 internal constant BITS_RATE_DATA_V2_RATE_AT_UTILIZATION_MAX = 84;\n\n    // TotalAmounts\n    uint256 internal constant BITS_TOTAL_AMOUNTS_SUPPLY_WITH_INTEREST = 0;\n    uint256 internal constant BITS_TOTAL_AMOUNTS_SUPPLY_INTEREST_FREE = 64;\n    uint256 internal constant BITS_TOTAL_AMOUNTS_BORROW_WITH_INTEREST = 128;\n    uint256 internal constant BITS_TOTAL_AMOUNTS_BORROW_INTEREST_FREE = 192;\n\n    // UserSupplyData\n    uint256 internal constant BITS_USER_SUPPLY_MODE = 0;\n    uint256 internal constant BITS_USER_SUPPLY_AMOUNT = 1;\n    uint256 internal constant BITS_USER_SUPPLY_PREVIOUS_WITHDRAWAL_LIMIT = 65;\n    uint256 internal constant BITS_USER_SUPPLY_LAST_UPDATE
    },
    "contracts/libraries/tickMath.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\n/// @title library that calculates number \"tick\" and \"ratioX96\" from this: ratioX96 = (1.0015^tick) * 2^96\n/// @notice this library is used in Fluid Vault protocol for optimiziation.\n/// @dev \"tick\" supports between -32767 and 32767. \"ratioX96\" supports between 37075072 and 169307877264527972847801929085841449095838922544595\nlibrary TickMath {\n    /// The minimum tick that can be passed in getRatioAtTick. 1.0015**-32767\n    int24 internal constant MIN_TICK = -32767;\n    /// The maximum tick that can be passed in getRatioAtTick. 1.0015**32767\n    int24 internal constant MAX_TICK = 32767;\n\n    uint256 internal constant FACTOR00 = 0x100000000000000000000000000000000;\n    uint256 internal constant FACTOR01 = 0xff9dd7de423466c20352b1246ce4856f; // 2^128/1.0015**1 = 339772707859149738855091969477551883631\n    uint256 internal constant FACTOR02 = 0xff3bd55f4488ad277531fa1c725a66d0; // 2^128/1.0015**2 = 339263812140938331358054887146831636176\n    uint256 internal constant FACTOR03 = 0xfe78410fd6498b73cb96a6917f853259; // 2^128/1.0015**4 = 338248306163758188337119769319392490073\n    uint256 internal constant FACTOR04 = 0xfcf2d9987c9be178ad5bfeffaa123273; // 2^128/1.0015**8 = 336226404141693512316971918999264834163\n    uint256 internal constant FACTOR05 = 0xf9ef02c4529258b057769680fc6601b3; // 2^128/1.0015**16 = 332218786018727629051611634067491389875\n    uint256 internal constant FACTOR06 = 0xf402d288133a85a17784a411f7aba082; // 2^128/1.0015**32 = 324346285652234375371948336458280706178\n    uint256 internal constant FACTOR07 = 0xe895615b5beb6386553757b0352bda90; // 2^128/1.0015**64 = 309156521885964218294057947947195947664\n    uint256 internal constant FACTOR08 = 0xd34f17a00ffa00a8309940a15930391a; // 2^128/1.0015**128 = 280877777739312896540849703637713172762 \n    uint256 internal constant FACTOR09 = 0xae6b7961714e20548d88ea5123f9a0ff; // 2^128/1.0015**256 = 231843708922198649176471782639349113087\n    uint256 internal constant FACTOR10 = 0x76d6461f27082d74e0feed3b388c0ca1; // 2^128/1.0015**512 = 157961477267171621126394973980180876449\n    uint256 internal constant FACTOR11 = 0x372a3bfe0745d8b6b19d985d9a8b85bb; // 2^128/1.0015**1024 = 73326833024599564193373530205717235131\n    uint256 internal constant FACTOR12 = 0x0be32cbee48979763cf7247dd7bb539d; // 2^128/1.0015**2048 = 15801066890623697521348224657638773661\n    uint256 internal constant FACTOR13 = 0x8d4f70c9ff4924dac37612d1e2921e;   // 2^128/1.0015**4096 = 733725103481409245883800626999235102\n    uint256 internal constant FACTOR14 = 0x4e009ae5519380809a02ca7aec77;     // 2^128/1.0015**8192 = 1582075887005588088019997442108535\n    uint256 internal constant FACTOR15 = 0x17c45e641b6e95dee056ff10;         // 2^128/1.0015**16384 = 7355550435635883087458926352\n\n    /// The minimum value that can be returned from getRatioAtTick. Equivalent to getRatioAtTick(MIN_TICK). ~ Equivalent to `(1 << 96) * (1.0015**-32767)`\n    uint256 internal constant MIN_RATIOX96 = 37075072;\n    /// The maximum value that can be returned from getRatioAtTick. Equivalent to getRatioAtTick(MAX_TICK).\n    /// ~ Equivalent to `(1 << 96) * (1.0015**32767)`, rounding etc. leading to minor difference\n    uint256 internal constant MAX_RATIOX96 = 169307877264527972847801929085841449095838922544595;\n\n    uint256 internal constant ZERO_TICK_SCALED_RATIO = 0x1000000000000000000000000; // 1 << 96 // 79228162514264337593543950336\n    uint256 internal constant _1E26 = 1e26;\n\n    /// @notice ratioX96 = (1.0015^tick) * 2^96\n    /// @dev Throws if |tick| > max tick\n    /// @param tick The input tick for the above formula\n    /// @return ratioX96 ratio = (debt amount/collateral amount)\n    function getRatioAtTick(int tick) internal pure returns (uint256 ratioX96) {\n        assembly {\n            let absTick_ := sub(xor(tick, sar(255, tick)), sar(255, tick))\n\n            if gt(absTick_, MAX_TICK) {\n                revert(0, 0)\n            }\n            let factor_ := FACTOR00\n            if 
    },
    "contracts/liquidity/adminModule/structs.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nabstract contract Structs {\n    struct AddressBool {\n        address addr;\n        bool value;\n    }\n\n    struct AddressUint256 {\n        address addr;\n        uint256 value;\n    }\n\n    /// @notice struct to set borrow rate data for version 1\n    struct RateDataV1Params {\n        ///\n        /// @param token for rate data\n        address token;\n        ///\n        /// @param kink in borrow rate. in 1e2: 100% = 10_000; 1% = 100\n        /// utilization below kink usually means slow increase in rate, once utilization is above kink borrow rate increases fast\n        uint256 kink;\n        ///\n        /// @param rateAtUtilizationZero desired borrow rate when utilization is zero. in 1e2: 100% = 10_000; 1% = 100\n        /// i.e. constant minimum borrow rate\n        /// e.g. at utilization = 0.01% rate could still be at least 4% (rateAtUtilizationZero would be 400 then)\n        uint256 rateAtUtilizationZero;\n        ///\n        /// @param rateAtUtilizationKink borrow rate when utilization is at kink. in 1e2: 100% = 10_000; 1% = 100\n        /// e.g. when rate should be 7% at kink then rateAtUtilizationKink would be 700\n        uint256 rateAtUtilizationKink;\n        ///\n        /// @param rateAtUtilizationMax borrow rate when utilization is maximum at 100%. in 1e2: 100% = 10_000; 1% = 100\n        /// e.g. when rate should be 125% at 100% then rateAtUtilizationMax would be 12_500\n        uint256 rateAtUtilizationMax;\n    }\n\n    /// @notice struct to set borrow rate data for version 2\n    struct RateDataV2Params {\n        ///\n        /// @param token for rate data\n        address token;\n        ///\n        /// @param kink1 first kink in borrow rate. in 1e2: 100% = 10_000; 1% = 100\n        /// utilization below kink 1 usually means slow increase in rate, once utilization is above kink 1 borrow rate increases faster\n        uint256 kink1;\n        ///\n        /// @param kink2 second kink in borrow rate. in 1e2: 100% = 10_000; 1% = 100\n        /// utilization below kink 2 usually means slow / medium increase in rate, once utilization is above kink 2 borrow rate increases fast\n        uint256 kink2;\n        ///\n        /// @param rateAtUtilizationZero desired borrow rate when utilization is zero. in 1e2: 100% = 10_000; 1% = 100\n        /// i.e. constant minimum borrow rate\n        /// e.g. at utilization = 0.01% rate could still be at least 4% (rateAtUtilizationZero would be 400 then)\n        uint256 rateAtUtilizationZero;\n        ///\n        /// @param rateAtUtilizationKink1 desired borrow rate when utilization is at first kink. in 1e2: 100% = 10_000; 1% = 100\n        /// e.g. when rate should be 7% at first kink then rateAtUtilizationKink would be 700\n        uint256 rateAtUtilizationKink1;\n        ///\n        /// @param rateAtUtilizationKink2 desired borrow rate when utilization is at second kink. in 1e2: 100% = 10_000; 1% = 100\n        /// e.g. when rate should be 7% at second kink then rateAtUtilizationKink would be 1_200\n        uint256 rateAtUtilizationKink2;\n        ///\n        /// @param rateAtUtilizationMax desired borrow rate when utilization is maximum at 100%. in 1e2: 100% = 10_000; 1% = 100\n        /// e.g. when rate should be 125% at 100% then rateAtUtilizationMax would be 12_500\n        uint256 rateAtUtilizationMax;\n    }\n\n    /// @notice struct to set token config\n    struct TokenConfig {\n        ///\n        /// @param token address\n        address token;\n        ///\n        /// @param fee charges on borrower's interest. in 1e2: 100% = 10_000; 1% = 100\n        uint256 fee;\n        ///\n        /// @param threshold on when to update the storage slot. in 1e2: 100% = 10_000; 1% = 100\n        uint256 threshold;\n    }\n\n    /// @notice struct to set user supply & withdrawal config\n    struct UserSupplyConfig {\n        ///\n        /// @param user address\n        address user;\n        ///\n        /// @param token address\n        address token;\n        ///\n     
    },
    "contracts/liquidity/interfaces/iLiquidity.sol": {
      "content": "//SPDX-License-Identifier: MIT\npragma solidity 0.8.21;\n\nimport { IProxy } from \"../../infiniteProxy/interfaces/iProxy.sol\";\nimport { Structs as AdminModuleStructs } from \"../adminModule/structs.sol\";\n\ninterface IFluidLiquidityAdmin {\n    /// @notice adds/removes auths. Auths generally could be contracts which can have restricted actions defined on contract.\n    ///         auths can be helpful in reducing governance overhead where it's not needed.\n    /// @param authsStatus_ array of structs setting allowed status for an address.\n    ///                     status true => add auth, false => remove auth\n    function updateAuths(AdminModuleStructs.AddressBool[] calldata authsStatus_) external;\n\n    /// @notice adds/removes guardians. Only callable by Governance.\n    /// @param guardiansStatus_ array of structs setting allowed status for an address.\n    ///                         status true => add guardian, false => remove guardian\n    function updateGuardians(AdminModuleStructs.AddressBool[] calldata guardiansStatus_) external;\n\n    /// @notice changes the revenue collector address (contract that is sent revenue). Only callable by Governance.\n    /// @param revenueCollector_  new revenue collector address\n    function updateRevenueCollector(address revenueCollector_) external;\n\n    /// @notice changes current status, e.g. for pausing or unpausing all user operations. Only callable by Auths.\n    /// @param newStatus_ new status\n    ///        status = 2 -> pause, status = 1 -> resume.\n    function changeStatus(uint256 newStatus_) external;\n\n    /// @notice                  update tokens rate data version 1. Only callable by Auths.\n    /// @param tokensRateData_   array of RateDataV1Params with rate data to set for each token\n    function updateRateDataV1s(AdminModuleStructs.RateDataV1Params[] calldata tokensRateData_) external;\n\n    /// @notice                  update tokens rate data version 2. Only callable by Auths.\n    /// @param tokensRateData_   array of RateDataV2Params with rate data to set for each token\n    function updateRateDataV2s(AdminModuleStructs.RateDataV2Params[] calldata tokensRateData_) external;\n\n    /// @notice updates token configs: fee charge on borrowers interest & storage update utilization threshold.\n    ///         Only callable by Auths.\n    /// @param tokenConfigs_ contains token address, fee & utilization threshold\n    function updateTokenConfigs(AdminModuleStructs.TokenConfig[] calldata tokenConfigs_) external;\n\n    /// @notice updates user classes: 0 is for new protocols, 1 is for established protocols.\n    ///         Only callable by Auths.\n    /// @param userClasses_ struct array of uint256 value to assign for each user address\n    function updateUserClasses(AdminModuleStructs.AddressUint256[] calldata userClasses_) external;\n\n    /// @notice sets user supply configs per token basis. Eg: with interest or interest-free and automated limits.\n    ///         Only callable by Auths.\n    /// @param userSupplyConfigs_ struct array containing user supply config, see `UserSupplyConfig` struct for more info\n    function updateUserSupplyConfigs(AdminModuleStructs.UserSupplyConfig[] memory userSupplyConfigs_) external;\n\n    /// @notice setting user borrow configs per token basis. Eg: with interest or interest-free and automated limits.\n    ///         Only callable by Auths.\n    /// @param userBorrowConfigs_ struct array containing user borrow config, see `UserBorrowConfig` struct for more info\n    function updateUserBorrowConfigs(AdminModuleStructs.UserBorrowConfig[] memory userBorrowConfigs_) external;\n\n    /// @notice pause operations for a particular user in class 0 (class 1 users can't be paused by guardians).\n    /// Only callable by Guardians.\n    /// @param user_          address of user to pause operations for\n    /// @param supplyTokens_  token addresses to pause withdrawals for\n    /// @param borrowTokens_  token addresses to pause borrowings for\n    function pauseUser(address user_, address[] calldata su
    },
    "contracts/protocols/vault/error.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\ncontract Error {\n    error FluidVaultError(uint256 errorId_);\n\n    /// @notice used to simulate liquidation to find the maximum liquidatable amounts\n    error FluidLiquidateResult(uint256 colLiquidated, uint256 debtLiquidated);\n}\n"
    },
    "contracts/protocols/vault/errorTypes.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nlibrary ErrorTypes {\n    /***********************************|\n    |           Vault Factory           | \n    |__________________________________*/\n\n    uint256 internal constant VaultFactory__InvalidOperation = 30001;\n    uint256 internal constant VaultFactory__Unauthorized = 30002;\n    uint256 internal constant VaultFactory__SameTokenNotAllowed = 30003;\n    uint256 internal constant VaultFactory__InvalidParams = 30004;\n    uint256 internal constant VaultFactory__InvalidVault = 30005;\n    uint256 internal constant VaultFactory__InvalidVaultAddress = 30006;\n    uint256 internal constant VaultFactory__OnlyDelegateCallAllowed = 30007;\n\n    /***********************************|\n    |            VaultT1                | \n    |__________________________________*/\n\n    /// @notice thrown at reentrancy\n    uint256 internal constant VaultT1__AlreadyEntered = 31001;\n\n    /// @notice thrown when user sends deposit & borrow amount as 0\n    uint256 internal constant VaultT1__InvalidOperateAmount = 31002;\n\n    /// @notice thrown when msg.value is not in sync with native token deposit or payback\n    uint256 internal constant VaultT1__InvalidMsgValueOperate = 31003;\n\n    /// @notice thrown when msg.sender is not the owner of the vault\n    uint256 internal constant VaultT1__NotAnOwner = 31004;\n\n    /// @notice thrown when user's position does not exist. Sending the wrong index from the frontend\n    uint256 internal constant VaultT1__TickIsEmpty = 31005;\n\n    /// @notice thrown when the user's position is above CF and the user tries to make it more risky by trying to withdraw or borrow\n    uint256 internal constant VaultT1__PositionAboveCF = 31006;\n\n    /// @notice thrown when the top tick is not initialized. Happens if the vault is totally new or all the user's left\n    uint256 internal constant VaultT1__TopTickDoesNotExist = 31007;\n\n    /// @notice thrown when msg.value in liquidate is not in sync payback\n    uint256 internal constant VaultT1__InvalidMsgValueLiquidate = 31008;\n\n    /// @notice thrown when slippage is more on liquidation than what the liquidator sent\n    uint256 internal constant VaultT1__ExcessSlippageLiquidation = 31009;\n\n    /// @notice thrown when msg.sender is not the rebalancer/reserve contract\n    uint256 internal constant VaultT1__NotRebalancer = 31010;\n\n    /// @notice thrown when NFT of one vault interacts with the NFT of other vault\n    uint256 internal constant VaultT1__NftNotOfThisVault = 31011;\n\n    /// @notice thrown when the token is not initialized on the liquidity contract\n    uint256 internal constant VaultT1__TokenNotInitialized = 31012;\n\n    /// @notice thrown when admin updates fallback if a non-auth calls vault\n    uint256 internal constant VaultT1__NotAnAuth = 31013;\n\n    /// @notice thrown in operate when user tries to witdhraw more collateral than deposited\n    uint256 internal constant VaultT1__ExcessCollateralWithdrawal = 31014;\n\n    /// @notice thrown in operate when user tries to payback more debt than borrowed\n    uint256 internal constant VaultT1__ExcessDebtPayback = 31015;\n\n    /// @notice thrown when user try to withdrawal more than operate's withdrawal limit\n    uint256 internal constant VaultT1__WithdrawMoreThanOperateLimit = 31016;\n\n    /// @notice thrown when caller of liquidityCallback is not Liquidity\n    uint256 internal constant VaultT1__InvalidLiquidityCallbackAddress = 31017;\n\n    /// @notice thrown when reentrancy is not already on\n    uint256 internal constant VaultT1__NotEntered = 31018;\n\n    /// @notice thrown when someone directly calls secondary implementation contract\n    uint256 internal constant VaultT1__OnlyDelegateCallAllowed = 31019;\n\n    /// @notice thrown when the safeTransferFrom for a token amount failed\n    uint256 internal constant VaultT1__TransferFromFailed = 31020;\n\n    /// @notice thrown when exchange price overflows while updating on storage\n    uint256 internal constant VaultT1__ExchangePriceOv
    },
    "contracts/protocols/vault/interfaces/iVaultT1.sol": {
      "content": "//SPDX-License-Identifier: MIT\npragma solidity 0.8.21;\n\ninterface IFluidVaultT1 {\n    /// @notice returns the vault id\n    function VAULT_ID() external view returns (uint256);\n\n    /// @notice reads uint256 data `result_` from storage at a bytes32 storage `slot_` key.\n    function readFromStorage(bytes32 slot_) external view returns (uint256 result_);\n\n    struct ConstantViews {\n        address liquidity;\n        address factory;\n        address adminImplementation;\n        address secondaryImplementation;\n        address supplyToken;\n        address borrowToken;\n        uint8 supplyDecimals;\n        uint8 borrowDecimals;\n        uint vaultId;\n        bytes32 liquiditySupplyExchangePriceSlot;\n        bytes32 liquidityBorrowExchangePriceSlot;\n        bytes32 liquidityUserSupplySlot;\n        bytes32 liquidityUserBorrowSlot;\n    }\n\n    /// @notice returns all Vault constants\n    function constantsView() external view returns (ConstantViews memory constantsView_);\n\n    /// @notice fetches the latest user position after a liquidation\n    function fetchLatestPosition(\n        int256 positionTick_,\n        uint256 positionTickId_,\n        uint256 positionRawDebt_,\n        uint256 tickData_\n    )\n        external\n        view\n        returns (\n            int256, // tick\n            uint256, // raw debt\n            uint256, // raw collateral\n            uint256, // branchID_\n            uint256 // branchData_\n        );\n\n    /// @notice calculates the updated vault exchange prices\n    function updateExchangePrices(\n        uint256 vaultVariables2_\n    )\n        external\n        view\n        returns (\n            uint256 liqSupplyExPrice_,\n            uint256 liqBorrowExPrice_,\n            uint256 vaultSupplyExPrice_,\n            uint256 vaultBorrowExPrice_\n        );\n\n    /// @notice calculates the updated vault exchange prices and writes them to storage\n    function updateExchangePricesOnStorage()\n        external\n        returns (\n            uint256 liqSupplyExPrice_,\n            uint256 liqBorrowExPrice_,\n            uint256 vaultSupplyExPrice_,\n            uint256 vaultBorrowExPrice_\n        );\n\n    /// @notice returns the liquidity contract address\n    function LIQUIDITY() external view returns (address);\n\n    function operate(\n        uint256 nftId_, // if 0 then new position\n        int256 newCol_, // if negative then withdraw\n        int256 newDebt_, // if negative then payback\n        address to_ // address at which the borrow & withdraw amount should go to. If address(0) then it'll go to msg.sender\n    )\n        external\n        payable\n        returns (\n            uint256, // nftId_\n            int256, // final supply amount. if - then withdraw\n            int256 // final borrow amount. if - then payback\n        );\n    \n    function liquidate(\n        uint256 debtAmt_,\n        uint256 colPerUnitDebt_, // min collateral needed per unit of debt in 1e18\n        address to_,\n        bool absorb_\n    ) external payable returns (uint actualDebtAmt_, uint actualColAmt_);\n\n    function absorb() external;\n\n    function rebalance() external payable returns (int supplyAmt_, int borrowAmt_);\n\n    error FluidLiquidateResult(uint256 colLiquidated, uint256 debtLiquidated);\n}\n"
    },
    "contracts/protocols/vault/rewards/events.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nabstract contract Events {\n    /// @notice Emitted when magnifier is updated\n    event LogUpdateMagnifier(address indexed vault, uint256 newMagnifier);\n\n    /// @notice Emitted when rewards are started\n    event LogRewardsStarted(uint256 startTime, uint256 endTime);\n}\n"
    },
    "contracts/protocols/vault/rewards/main.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nimport { FluidVaultT1Admin } from \"../vaultT1/adminModule/main.sol\";\nimport { IFluidVaultT1 } from \"../interfaces/iVaultT1.sol\";\nimport { IFluidReserveContract } from \"../../../reserve/interfaces/iReserveContract.sol\";\nimport { LiquiditySlotsLink } from \"../../../libraries/liquiditySlotsLink.sol\";\nimport { Events } from \"./events.sol\";\nimport { Variables } from \"./variables.sol\";\nimport { ErrorTypes } from \"../errorTypes.sol\";\nimport { Error } from \"../error.sol\";\nimport { IFluidLiquidity } from \"../../../liquidity/interfaces/iLiquidity.sol\";\n\n/// @title VaultRewards\n/// @notice This contract is designed to adjust the supply rate magnifier for a vault based on the current collateral supply & supply rate.\n/// The adjustment aims to dynamically scale the rewards given to lenders as the TVL in the vault changes.\n///\n/// The magnifier is adjusted based on a regular most used reward type where rewardRate = totalRewardsAnnually / totalSupply.\n/// Reward rate is applied by adjusting the supply magnifier on vault.\n/// Adjustments are made via the rebalance function, which is restricted to be called by designated rebalancers only.\ncontract FluidVaultRewards is Variables, Events, Error {\n    /// @dev Validates that an address is not the zero address\n    modifier validAddress(address value_) {\n        if (value_ == address(0)) {\n            revert FluidVaultError(ErrorTypes.VaultRewards__AddressZero);\n        }\n        _;\n    }\n\n    /// @dev Validates that an address is a rebalancer (taken from reserve contract)\n    modifier onlyRebalancer() {\n        if (!RESERVE_CONTRACT.isRebalancer(msg.sender)) {\n            revert FluidVaultError(ErrorTypes.VaultRewards__Unauthorized);\n        }\n        _;\n    }\n\n    /// @notice Constructs the FluidVaultRewards contract.\n    /// @param reserveContract_ The address of the reserve contract where rebalancers are defined.\n    /// @param vault_ The vault to which this contract will apply new magnifier parameter.\n    /// @param liquidity_ Fluid liquidity address\n    /// @param rewardsAmt_ Amounts of rewards to distribute\n    /// @param duration_ rewards duration\n    /// @param initiator_ address that can start rewards with `start()`\n    /// @param collateralToken_ vault collateral token address\n    constructor(\n        IFluidReserveContract reserveContract_,\n        IFluidVaultT1 vault_,\n        IFluidLiquidity liquidity_,\n        uint256 rewardsAmt_,\n        uint256 duration_,\n        address initiator_,\n        address collateralToken_\n    ) validAddress(address(reserveContract_)) validAddress(address(liquidity_))  validAddress(address(vault_)) validAddress(initiator_)  validAddress(address(collateralToken_)){\n        if (rewardsAmt_ == 0 || duration_ == 0) {\n            revert FluidVaultError(ErrorTypes.VaultRewards__InvalidParams);\n        }\n        RESERVE_CONTRACT = reserveContract_;\n        VAULT = vault_;\n        REWARDS_AMOUNT = rewardsAmt_;\n        REWARDS_AMOUNT_PER_YEAR = rewardsAmt_ * SECONDS_PER_YEAR / duration_;\n        DURATION = duration_;\n        INITIATOR = initiator_;\n        LIQUIDITY = liquidity_;\n        VAULT_COLLATERAL_TOKEN = collateralToken_;\n\n        LIQUIDITY_TOTAL_AMOUNTS_COLLATERAL_TOKEN_SLOT = LiquiditySlotsLink.calculateMappingStorageSlot(\n            LiquiditySlotsLink.LIQUIDITY_TOTAL_AMOUNTS_MAPPING_SLOT,\n            collateralToken_\n        );\n        LIQUIDITY_EXCHANGE_PRICE_COLLATERAL_TOKEN_SLOT = LiquiditySlotsLink.calculateMappingStorageSlot(\n            LiquiditySlotsLink.LIQUIDITY_EXCHANGE_PRICES_MAPPING_SLOT,\n            collateralToken_\n        );\n    }\n\n    /// @notice Rebalances the supply rate magnifier based on the current collateral supply.\n    /// Can only be called by an authorized rebalancer.\n    function rebalance() external onlyRebalancer {\n        (uint256 newMagnifier_, bool ended_) = calculateMagnifier();\n        if (ended_) {\n            ended = true;\n        }\n  
    },
    "contracts/protocols/vault/rewards/variables.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nimport { IFluidReserveContract } from \"../../../reserve/interfaces/iReserveContract.sol\";\nimport { IFluidVaultT1 } from \"../interfaces/iVaultT1.sol\";\nimport { IFluidLiquidity } from \"../../../liquidity/interfaces/iLiquidity.sol\";\n\nabstract contract Constants {\n    IFluidLiquidity public immutable LIQUIDITY;\n    IFluidReserveContract public immutable RESERVE_CONTRACT;\n    IFluidVaultT1 public immutable VAULT;\n    uint256 public immutable REWARDS_AMOUNT;\n    uint256 public immutable REWARDS_AMOUNT_PER_YEAR;\n    uint256 public immutable DURATION;\n    address public immutable INITIATOR;\n    address public immutable VAULT_COLLATERAL_TOKEN;\n\n    bytes32 internal immutable LIQUIDITY_TOTAL_AMOUNTS_COLLATERAL_TOKEN_SLOT;\n    bytes32 internal immutable LIQUIDITY_EXCHANGE_PRICE_COLLATERAL_TOKEN_SLOT;\n    uint256 internal constant FOUR_DECIMALS = 10000;\n    uint256 internal constant SECONDS_PER_YEAR = 365 days;\n    uint256 internal constant DEFAULT_EXPONENT_SIZE = 8;\n    uint256 internal constant DEFAULT_EXPONENT_MASK = 0xff;\n    uint256 internal constant EXCHANGE_PRICES_PRECISION = 1e12;\n    uint256 internal constant X14 = 0x3fff;\n    uint256 internal constant X16 = 0xffff;\n    uint256 internal constant X64 = 0xffffffffffffffff;\n}\n\nabstract contract Variables is Constants {\n    bool public ended; // when rewards are ended\n    uint96 public startTime;\n    uint96 public endTime;\n}\n"
    },
    "contracts/protocols/vault/vaultT1/adminModule/events.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\ncontract Events {\n    /// @notice emitted when the supply rate magnifier config is updated\n    event LogUpdateSupplyRateMagnifier(uint supplyRateMagnifier_);\n\n    /// @notice emitted when the borrow rate magnifier config is updated\n    event LogUpdateBorrowRateMagnifier(uint borrowRateMagnifier_);\n\n    /// @notice emitted when the collateral factor config is updated\n    event LogUpdateCollateralFactor(uint collateralFactor_);\n\n    /// @notice emitted when the liquidation threshold config is updated\n    event LogUpdateLiquidationThreshold(uint liquidationThreshold_);\n\n    /// @notice emitted when the liquidation max limit config is updated\n    event LogUpdateLiquidationMaxLimit(uint liquidationMaxLimit_);\n\n    /// @notice emitted when the withdrawal gap config is updated\n    event LogUpdateWithdrawGap(uint withdrawGap_);\n\n    /// @notice emitted when the liquidation penalty config is updated\n    event LogUpdateLiquidationPenalty(uint liquidationPenalty_);\n\n    /// @notice emitted when the borrow fee config is updated\n    event LogUpdateBorrowFee(uint borrowFee_);\n\n    /// @notice emitted when the core setting configs are updated\n    event LogUpdateCoreSettings(\n        uint supplyRateMagnifier_,\n        uint borrowRateMagnifier_,\n        uint collateralFactor_,\n        uint liquidationThreshold_,\n        uint liquidationMaxLimit_,\n        uint withdrawGap_,\n        uint liquidationPenalty_,\n        uint borrowFee_\n    );\n\n    /// @notice emitted when the oracle is updated\n    event LogUpdateOracle(address indexed newOracle_);\n\n    /// @notice emitted when the allowed rebalancer is updated\n    event LogUpdateRebalancer(address indexed newRebalancer_);\n\n    /// @notice emitted when funds are rescued\n    event LogRescueFunds(address indexed token_);\n\n    /// @notice emitted when dust debt is absorbed for `nftIds_`\n    event LogAbsorbDustDebt(uint256[] nftIds_, uint256 absorbedDustDebt_);\n}\n"
    },
    "contracts/protocols/vault/vaultT1/adminModule/main.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nimport { IERC20 } from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport { SafeERC20 } from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport { Address } from \"@openzeppelin/contracts/utils/Address.sol\";\n\nimport { Variables } from \"../common/variables.sol\";\nimport { Events } from \"./events.sol\";\nimport { ErrorTypes } from \"../../errorTypes.sol\";\nimport { Error } from \"../../error.sol\";\nimport { IFluidVaultT1 } from \"../../interfaces/iVaultT1.sol\";\nimport { BigMathMinified } from \"../../../../libraries/bigMathMinified.sol\";\nimport { TickMath } from \"../../../../libraries/tickMath.sol\";\n\n/// @notice Fluid Vault protocol Admin Module contract.\n///         Implements admin related methods to set configs such as liquidation params, rates\n///         oracle address etc.\n///         Methods are limited to be called via delegateCall only. Vault CoreModule (\"VaultT1\" contract)\n///         is expected to call the methods implemented here after checking the msg.sender is authorized.\n///         All methods update the exchange prices in storage before changing configs.\ncontract FluidVaultT1Admin is Variables, Events, Error {\n    uint private constant X8 = 0xff;\n    uint private constant X10 = 0x3ff;\n    uint private constant X16 = 0xffff;\n    uint private constant X19 = 0x7ffff;\n    uint private constant X24 = 0xffffff;\n    uint internal constant X64 = 0xffffffffffffffff;\n    uint private constant X96 = 0xffffffffffffffffffffffff;\n    address private constant NATIVE_TOKEN = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;\n\n    address private immutable addressThis;\n\n    constructor() {\n        addressThis = address(this);\n    }\n\n    modifier _verifyCaller() {\n        if (address(this) == addressThis) {\n            revert FluidVaultError(ErrorTypes.VaultT1Admin__OnlyDelegateCallAllowed);\n        }\n        _;\n    }\n\n    /// @dev updates exchange price on storage, called on all admin methods in combination with _verifyCaller modifier so\n    /// only called by authorized delegatecall\n    modifier _updateExchangePrice() {\n        IFluidVaultT1(address(this)).updateExchangePricesOnStorage();\n        _;\n    }\n\n    function _checkLiquidationMaxLimitAndPenalty(uint liquidationMaxLimit_, uint liquidationPenalty_) private pure {\n        // liquidation max limit with penalty should not go above 99.7%\n        // As liquidation with penalty can happen from liquidation Threshold to max limit\n        // If it goes above 100% than that means liquidator is getting more collateral than user's available\n        if ((liquidationMaxLimit_ + liquidationPenalty_) > 9970) {\n            revert FluidVaultError(ErrorTypes.VaultT1Admin__ValueAboveLimit);\n        }\n    }\n\n    /// @notice updates the supply rate magnifier to `supplyRateMagnifier_`. Input in 1e2 (1% = 100, 100% = 10_000).\n    function updateSupplyRateMagnifier(uint supplyRateMagnifier_) public _updateExchangePrice _verifyCaller {\n        emit LogUpdateSupplyRateMagnifier(supplyRateMagnifier_);\n\n        if (supplyRateMagnifier_ > X16) revert FluidVaultError(ErrorTypes.VaultT1Admin__ValueAboveLimit);\n\n        vaultVariables2 =\n            (vaultVariables2 & 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff0000) |\n            supplyRateMagnifier_;\n    }\n\n    /// @notice updates the borrow rate magnifier to `borrowRateMagnifier_`. Input in 1e2 (1% = 100, 100% = 10_000).\n    function updateBorrowRateMagnifier(uint borrowRateMagnifier_) public _updateExchangePrice _verifyCaller {\n        emit LogUpdateBorrowRateMagnifier(borrowRateMagnifier_);\n\n        if (borrowRateMagnifier_ > X16) revert FluidVaultError(ErrorTypes.VaultT1Admin__ValueAboveLimit);\n\n        vaultVariables2 =\n            (vaultVariables2 & 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffff0000ffff) |\n            (borrowRateMagnifier_ << 16);\n    }\n\n    /// @notice updates the collateral factor to `collateralFactor_`. 
    },
    "contracts/protocols/vault/vaultT1/common/variables.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\ncontract Variables {\n    /***********************************|\n    |         Storage Variables         |\n    |__________________________________*/\n\n    /// note: in all variables. For tick >= 0 are represented with bit as 1, tick < 0 are represented with bit as 0\n    /// note: read all the variables through storageRead.sol\n\n    /// note: vaultVariables contains vault variables which need regular updates through transactions\n    /// First 1 bit => 0 => re-entrancy. If 0 then allow transaction to go, else throw.\n    /// Next 1 bit => 1 => Is the current active branch liquidated? If true then check the branch's minima tick before creating a new position\n    /// If the new tick is greater than minima tick then initialize a new branch, make that as current branch & do proper linking\n    /// Next 1 bit => 2 => sign of topmost tick (0 -> negative; 1 -> positive)\n    /// Next 19 bits => 3-21 => absolute value of topmost tick\n    /// Next 30 bits => 22-51 => current branch ID\n    /// Next 30 bits => 52-81 => total branch ID\n    /// Next 64 bits => 82-145 => Total supply\n    /// Next 64 bits => 146-209 => Total borrow\n    /// Next 32 bits => 210-241 => Total positions\n    uint256 internal vaultVariables;\n\n    /// note: vaultVariables2 contains variables which do not update on every transaction. So mainly admin/auth set amount\n    /// First 16 bits => 0-15 => supply rate magnifier; 10000 = 1x (Here 16 bits should be more than enough)\n    /// Next 16 bits => 16-31 => borrow rate magnifier; 10000 = 1x (Here 16 bits should be more than enough)\n    /// Next 10 bits => 32-41 => collateral factor. 800 = 0.8 = 80% (max precision of 0.1%)\n    /// Next 10 bits => 42-51 => liquidation Threshold. 900 = 0.9 = 90% (max precision of 0.1%)\n    /// Next 10 bits => 52-61 => liquidation Max Limit. 950 = 0.95 = 95% (max precision of 0.1%) (above this 100% liquidation can happen)\n    /// Next 10 bits => 62-71 => withdraw gap. 100 = 0.1 = 10%. (max precision of 0.1%) (max 7 bits can also suffice for the requirement here of 0.1% to 10%). Needed to save some limits on withdrawals so liquidate can work seamlessly.\n    /// Next 10 bits => 72-81 => liquidation penalty. 100 = 0.01 = 1%. (max precision of 0.01%) (max liquidation penantly can be 10.23%). Applies when tick is in between liquidation Threshold & liquidation Max Limit.\n    /// Next 10 bits => 82-91 => borrow fee. 100 = 0.01 = 1%. (max precision of 0.01%) (max borrow fee can be 10.23%). Fees on borrow.\n    /// Next 4  bits => 92-95 => empty\n    /// Next 160 bits => 96-255 => Oracle address\n    uint256 internal vaultVariables2;\n\n    /// note: stores absorbed liquidity\n    /// First 128 bits raw debt amount\n    /// last 128 bits raw col amount\n    uint256 internal absorbedLiquidity;\n\n    /// position index => position data uint\n    /// if the entire variable is 0 (meaning not initialized) at the start that means no position at all\n    /// First 1 bit => 0 => position type (0 => borrow position; 1 => supply position)\n    /// Next 1 bit => 1 => sign of user's tick (0 => negative; 1 => positive)\n    /// Next 19 bits => 2-20 => absolute value of user's tick\n    /// Next 24 bits => 21-44 => user's tick's id\n    /// Below we are storing user's collateral & not debt, because the position can also be only collateral with no tick but it can never be only debt\n    /// Next 64 bits => 45-108 => user's supply amount. Debt will be calculated through supply & ratio.\n    /// Next 64 bits => 109-172 => user's dust debt amount. User's net debt = total debt - dust amount. Total debt is calculated through supply & ratio\n    /// User won't pay any extra interest on dust debt & hence we will not show it as a debt on UI. For user's there's no dust.\n    mapping(uint256 => uint256) internal positionData;\n\n    /// Tick has debt only keeps data of non liquidated positions. liquidated tick's data stays in branch itself\n    /// tick parent => uint (represents bool for 256 children)\n    /// par
    },
    "contracts/reserve/interfaces/iReserveContract.sol": {
      "content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.21;\n\nimport { IFluidLiquidity } from \"../../liquidity/interfaces/iLiquidity.sol\";\n\ninterface IFluidReserveContract {\n    function isRebalancer(address user) external returns (bool);\n\n    function initialize(\n        address[] memory _auths,\n        address[] memory _rebalancers,\n        IFluidLiquidity liquidity_,\n        address owner_\n    ) external;\n\n    function rebalanceFToken(address protocol_) external;\n\n    function rebalanceVault(address protocol_) external;\n\n    function transferFunds(address token_) external;\n\n    function getProtocolTokens(address protocol_) external;\n\n    function updateAuth(address auth_, bool isAuth_) external;\n\n    function updateRebalancer(address rebalancer_, bool isRebalancer_) external;\n\n    function approve(address[] memory protocols_, address[] memory tokens_, uint256[] memory amounts_) external;\n\n    function revoke(address[] memory protocols_, address[] memory tokens_) external;\n}\n"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 10000000
    },
    "evmVersion": "paris",
    "outputSelection": {
      "*": {
        "*": [
          "abi",
          "evm.bytecode",
          "evm.deployedBytecode",
          "evm.methodIdentifiers",
          "metadata",
          "devdoc",
          "userdoc",
          "storageLayout",
          "evm.gasEstimates"
        ],
        "": [
          "ast"
        ]
      }
    },
    "metadata": {
      "useLiteralContent": true
    }
  }
}