feat: add BASIC-D connector on Arbitrum

This commit is contained in:
Shriya Tyagi 2024-07-08 21:36:18 +05:30
parent e27b6b10c7
commit 11e7794636
4 changed files with 468 additions and 1 deletions

View File

@ -0,0 +1,38 @@
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;
contract Events {
event LogDeposit(
address indexed token,
uint256 underlyingAmt,
uint256 sharesReceieved,
uint256 getId,
uint256 setId
);
event LogMint(
address indexed token,
uint256 shareAmt,
uint256 tokensDeposited,
uint256 getId,
uint256 setId
);
event LogWithdraw(
address indexed token,
uint256 underlyingAmt,
uint256 sharedBurned,
address indexed to,
uint256 getId,
uint256 setId
);
event LogRedeem(
address indexed token,
uint256 shareAmt,
uint256 underlyingAmtReceieved,
address to,
uint256 getId,
uint256 setId
);
}

View File

@ -0,0 +1,233 @@
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)
pragma solidity ^0.8.2;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
* @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
* https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
*
* _Available since v4.7._
*/
interface IERC4626 is IERC20 {
event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);
event Withdraw(
address indexed sender,
address indexed receiver,
address indexed owner,
uint256 assets,
uint256 shares
);
function decimals() external view returns (uint8);
/**
* @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
*
* - MUST be an ERC-20 token contract.
* - MUST NOT revert.
*/
function asset() external view returns (address assetTokenAddress);
/**
* @dev Returns the total amount of the underlying asset that is managed by Vault.
*
* - SHOULD include any compounding that occurs from yield.
* - MUST be inclusive of any fees that are charged against assets in the Vault.
* - MUST NOT revert.
*/
function totalAssets() external view returns (uint256 totalManagedAssets);
/**
* @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
* scenario where all the conditions are met.
*
* - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
* - MUST NOT show any variations depending on the caller.
* - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
* - MUST NOT revert.
*
* NOTE: This calculation MAY NOT reflect the per-user price-per-share, and instead should reflect the
* average-users price-per-share, meaning what the average user should expect to see when exchanging to and
* from.
*/
function convertToShares(uint256 assets) external view returns (uint256 shares);
/**
* @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
* scenario where all the conditions are met.
*
* - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
* - MUST NOT show any variations depending on the caller.
* - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
* - MUST NOT revert.
*
* NOTE: This calculation MAY NOT reflect the per-user price-per-share, and instead should reflect the
* average-users price-per-share, meaning what the average user should expect to see when exchanging to and
* from.
*/
function convertToAssets(uint256 shares) external view returns (uint256 assets);
/**
* @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
* through a deposit call.
*
* - MUST return a limited value if receiver is subject to some deposit limit.
* - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
* - MUST NOT revert.
*/
function maxDeposit(address receiver) external view returns (uint256 maxAssets);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
* current on-chain conditions.
*
* - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
* call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
* in the same transaction.
* - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
* deposit would be accepted, regardless if the user has enough tokens approved, etc.
* - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by depositing.
*/
function previewDeposit(uint256 assets) external view returns (uint256 shares);
/**
* @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
*
* - MUST emit the Deposit event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
* deposit execution, and are accounted for during deposit.
* - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
* approving enough underlying tokens to the Vault contract, etc).
*
* NOTE: most implementations will require pre-approval of the Vault with the Vaults underlying asset token.
*/
function deposit(uint256 assets, address receiver) external returns (uint256 shares);
/**
* @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
* - MUST return a limited value if receiver is subject to some mint limit.
* - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
* - MUST NOT revert.
*/
function maxMint(address receiver) external view returns (uint256 maxShares);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
* current on-chain conditions.
*
* - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
* in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
* same transaction.
* - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
* would be accepted, regardless if the user has enough tokens approved, etc.
* - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by minting.
*/
function previewMint(uint256 shares) external view returns (uint256 assets);
/**
* @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
*
* - MUST emit the Deposit event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
* execution, and are accounted for during mint.
* - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
* approving enough underlying tokens to the Vault contract, etc).
*
* NOTE: most implementations will require pre-approval of the Vault with the Vaults underlying asset token.
*/
function mint(uint256 shares, address receiver) external returns (uint256 assets);
/**
* @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
* Vault, through a withdraw call.
*
* - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
* - MUST NOT revert.
*/
function maxWithdraw(address owner) external view returns (uint256 maxAssets);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
* given current on-chain conditions.
*
* - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
* call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
* called
* in the same transaction.
* - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
* the withdrawal would be accepted, regardless if the user has enough shares, etc.
* - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by depositing.
*/
function previewWithdraw(uint256 assets) external view returns (uint256 shares);
/**
* @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
*
* - MUST emit the Withdraw event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
* withdraw execution, and are accounted for during withdraw.
* - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
* not having enough shares, etc).
*
* Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
* Those methods should be performed separately.
*/
function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);
/**
* @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
* through a redeem call.
*
* - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
* - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
* - MUST NOT revert.
*/
function maxRedeem(address owner) external view returns (uint256 maxShares);
/**
* @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
* given current on-chain conditions.
*
* - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
* in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
* same transaction.
* - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
* redemption would be accepted, regardless if the user has enough shares, etc.
* - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
* - MUST NOT revert.
*
* NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
* share price or some other type of condition, meaning the depositor will lose assets by redeeming.
*/
function previewRedeem(uint256 shares) external view returns (uint256 assets);
/**
* @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
*
* - MUST emit the Withdraw event.
* - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
* redeem execution, and are accounted for during redeem.
* - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
* not having enough shares, etc).
*
* NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
* Those methods should be performed separately.
*/
function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

View File

@ -0,0 +1,196 @@
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;
/**
* @title Basic D V2.
* @dev Deposit, Mint, Withdraw, & Redeem from ERC4626 DSA.
*/
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC4626 } from "./interface.sol";
import { TokenInterface } from "../../common/interfaces.sol";
import { DSMath } from "../../common/math.sol";
import { Basic } from "../../common/basic.sol";
import { Events } from "./events.sol";
abstract contract BasicConnector is Events, DSMath, Basic {
/**
* @dev Deposit underlying asset to ERC4626 Vault.
* @notice Mints vault shares by depositing exactly amount of underlying assets
* @param vaultToken ERC4626 Token address.
* @param underlyingAmt The amount of the underlying asset to deposit. (For max: `uint256(-1)`)
* @param getId ID to retrieve amt.
* @param setId ID stores the amount of tokens deposited.
*/
function deposit(
address vaultToken,
uint256 underlyingAmt,
uint256 getId,
uint256 setId
) public returns (string memory _eventName, bytes memory _eventParam) {
uint256 _underlyingAmt = getUint(getId, underlyingAmt);
IERC4626 vaultTokenContract = IERC4626(vaultToken);
TokenInterface _underlyingTokenContract = TokenInterface(
vaultTokenContract.asset()
);
_underlyingAmt = _underlyingAmt == type(uint256).max
? _underlyingTokenContract.balanceOf(address(this))
: _underlyingAmt;
approve(_underlyingTokenContract, vaultToken, _underlyingAmt);
// Deposit tokens for shares
uint256 _sharesReceieved =
vaultTokenContract.deposit(_underlyingAmt, address(this));
setUint(setId, _sharesReceieved);
_eventName = "LogDeposit(address,uint256,uint256,uint256,uint256)";
_eventParam = abi.encode(
vaultToken,
_underlyingAmt,
_sharesReceieved,
getId,
setId
);
}
/**
* @dev Mint underlying asset to ERC4626 Vault.
* @notice Mints vault shares by minting exactly amount of underlying assets
* @param vaultToken ERC4626 Token address.
* @param shareAmt The amount of the share to mint. (For max: `uint256(-1)`)
* @param getId ID to retrieve amt.
* @param setId ID stores the amount of tokens minted.
*/
function mint(
address vaultToken,
uint256 shareAmt,
uint256 getId,
uint256 setId
) public returns (string memory _eventName, bytes memory _eventParam) {
uint256 _shareAmt = getUint(getId, shareAmt);
IERC4626 vaultTokenContract = IERC4626(vaultToken);
TokenInterface underlyingTokenContract = TokenInterface(
vaultTokenContract.asset()
);
uint256 _underlyingTokenAmount = vaultTokenContract.previewMint(
_shareAmt
);
approve(underlyingTokenContract, vaultToken, _underlyingTokenAmount);
// Mint shares for tokens
uint256 _tokensDeposited =
vaultTokenContract.mint(_shareAmt, address(this));
setUint(setId, _tokensDeposited);
_eventName = "LogMint(address,uint256,uint256,uint256,uint256)";
_eventParam = abi.encode(
vaultToken,
_shareAmt,
_tokensDeposited,
getId,
setId
);
}
/**
* @dev Withdraw underlying asset from ERC4626 Vault.
* @notice Withdraw vault shares with exactly amount of underlying assets
* @param vaultToken ERC4626 Token address.
* @param underlyingAmt The amount of the token to withdraw. (For max: `uint256(-1)`)
* @param to The address of receiver.
* @param getId ID to retrieve amt.
* @param setId ID stores the amount of tokens withdrawn.
*/
function withdraw(
address vaultToken,
uint256 underlyingAmt,
address payable to,
uint256 getId,
uint256 setId
) public returns (string memory _eventName, bytes memory _eventParam) {
uint256 _underlyingAmt = getUint(getId, underlyingAmt);
IERC4626 vaultTokenContract = IERC4626(vaultToken);
TokenInterface underlyingTokenContract = TokenInterface(
vaultTokenContract.asset()
);
_underlyingAmt = _underlyingAmt == type(uint256).max
? underlyingTokenContract.balanceOf(address(this))
: _underlyingAmt;
// Withdraw tokens for shares
uint256 _sharesBurned =
vaultTokenContract.withdraw(_underlyingAmt, to, address(this));
setUint(setId, _underlyingAmt);
_eventName = "LogWithdraw(address,uint256,uint256,address,uint256,uint256)";
_eventParam = abi.encode(
vaultToken,
_underlyingAmt,
_sharesBurned,
to,
getId,
setId
);
}
/**
* @dev Redeem underlying asset from ERC4626 Vault.
* @notice Redeem vault shares with exactly amount of underlying assets
* @param vaultToken ERC4626 Token address.
* @param shareAmt The amount of the token to redeem. (For max: `uint256(-1)`)
* @param to The address of receiver.
* @param getId ID to retrieve amt.
* @param setId ID stores the amount of tokens redeem.
*/
function redeem(
address vaultToken,
uint256 shareAmt,
address payable to,
uint256 getId,
uint256 setId
) public returns (string memory _eventName, bytes memory _eventParam) {
uint256 _shareAmt = getUint(getId, shareAmt);
IERC4626 vaultTokenContract = IERC4626(vaultToken);
TokenInterface underlyingTokenContract = TokenInterface(
vaultTokenContract.asset()
);
_shareAmt = _shareAmt == type(uint256).max
? vaultTokenContract.balanceOf(address(this))
: _shareAmt;
// Redeem tokens for shares
uint256 _underlyingAmtReceieved =
vaultTokenContract.redeem(_shareAmt, to, address(this));
setUint(setId, _shareAmt);
_eventName = "LogRedeem(address,uint256,uint256,address,uint256,uint256)";
_eventParam = abi.encode(
vaultToken,
_shareAmt,
_underlyingAmtReceieved,
to,
getId,
setId
);
}
}
contract ConnectV2BasicERC4626V2Arbitrum is BasicConnector {
string public constant name = "BASIC-ERC4626-v2.0";
}

View File

@ -133,6 +133,6 @@ contract LiquidityResolver is Stores, Variables, Events {
} }
contract ConnectV2InstaPoolV5 is LiquidityResolver { contract ConnectV2InstaPoolV5Arbitrum is LiquidityResolver {
string public name = "Instapool-v5"; string public name = "Instapool-v5";
} }