// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.8;

import {SafeMath} from '../dependencies/openzeppelin/contracts//SafeMath.sol';
import {IERC20} from '../dependencies/openzeppelin/contracts//IERC20.sol';
import {VersionedInitializable} from '../libraries/aave-upgradeability/VersionedInitializable.sol';
import {IAToken} from '../tokenization/interfaces/IAToken.sol';
import {IStableDebtToken} from '../tokenization/interfaces/IStableDebtToken.sol';
import {IVariableDebtToken} from '../tokenization/interfaces/IVariableDebtToken.sol';
import {IPriceOracleGetter} from '../interfaces/IPriceOracleGetter.sol';
import {GenericLogic} from '../libraries/logic/GenericLogic.sol';
import {ReserveLogic} from '../libraries/logic/ReserveLogic.sol';
import {UserConfiguration} from '../libraries/configuration/UserConfiguration.sol';
import {Helpers} from '../libraries/helpers/Helpers.sol';
import {WadRayMath} from '../libraries/math/WadRayMath.sol';
import {PercentageMath} from '../libraries/math/PercentageMath.sol';
import {SafeERC20} from '../dependencies/openzeppelin/contracts/SafeERC20.sol';
import {ISwapAdapter} from '../interfaces/ISwapAdapter.sol';
import {Errors} from '../libraries/helpers/Errors.sol';
import {ValidationLogic} from '../libraries/logic/ValidationLogic.sol';
import {LendingPoolStorage} from './LendingPoolStorage.sol';

/**
 * @title LendingPoolCollateralManager contract
 * @author Aave
 * @notice Implements actions involving management of collateral in the protocol.
 * @notice this contract will be ran always through delegatecall
 * @dev LendingPoolCollateralManager inherits VersionedInitializable from OpenZeppelin to have the same storage layout as LendingPool
 **/
contract LendingPoolCollateralManager is VersionedInitializable, LendingPoolStorage {
  using SafeERC20 for IERC20;
  using SafeMath for uint256;
  using WadRayMath for uint256;
  using PercentageMath for uint256;

  // IMPORTANT The storage layout of the LendingPool is reproduced here because this contract
  // is gonna be used through DELEGATECALL

  uint256 internal constant LIQUIDATION_CLOSE_FACTOR_PERCENT = 5000;

  /**
   * @dev emitted when a borrower is liquidated
   * @param collateral the address of the collateral being liquidated
   * @param principal the address of the reserve
   * @param user the address of the user being liquidated
   * @param purchaseAmount the total amount liquidated
   * @param liquidatedCollateralAmount the amount of collateral being liquidated
   * @param liquidator the address of the liquidator
   * @param receiveAToken true if the liquidator wants to receive aTokens, false otherwise
   **/
  event LiquidationCall(
    address indexed collateral,
    address indexed principal,
    address indexed user,
    uint256 purchaseAmount,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  struct LiquidationCallLocalVars {
    uint256 userCollateralBalance;
    uint256 userStableDebt;
    uint256 userVariableDebt;
    uint256 maxPrincipalAmountToLiquidate;
    uint256 actualAmountToLiquidate;
    uint256 liquidationRatio;
    uint256 maxAmountCollateralToLiquidate;
    ReserveLogic.InterestRateMode borrowRateMode;
    uint256 userStableRate;
    uint256 maxCollateralToLiquidate;
    uint256 principalAmountNeeded;
    uint256 healthFactor;
    IAToken collateralAtoken;
    bool isCollateralEnabled;
    address principalAToken;
    uint256 errorCode;
    string errorMsg;
  }

  struct AvailableCollateralToLiquidateLocalVars {
    uint256 userCompoundedBorrowBalance;
    uint256 liquidationBonus;
    uint256 collateralPrice;
    uint256 principalCurrencyPrice;
    uint256 maxAmountCollateralToLiquidate;
    uint256 principalDecimals;
    uint256 collateralDecimals;
  }

  /**
   * @dev as the contract extends the VersionedInitializable contract to match the state
   * of the LendingPool contract, the getRevision() function is needed.
   */
  function getRevision() internal override pure returns (uint256) {
    return 0;
  }

  /**
   * @dev users can invoke this function to liquidate an undercollateralized position.
   * @param collateral the address of the collateral to liquidated
   * @param principal the address of the principal reserve
   * @param user the address of the borrower
   * @param purchaseAmount the amount of principal that the liquidator wants to repay
   * @param receiveAToken true if the liquidators wants to receive the aTokens, false if
   * he wants to receive the underlying asset directly
   **/
  function liquidationCall(
    address collateral,
    address principal,
    address user,
    uint256 purchaseAmount,
    bool receiveAToken
  ) external returns (uint256, string memory) {
    ReserveLogic.ReserveData storage collateralReserve = _reserves[collateral];
    ReserveLogic.ReserveData storage principalReserve = _reserves[principal];
    UserConfiguration.Map storage userConfig = _usersConfig[user];

    LiquidationCallLocalVars memory vars;

    (, , , , vars.healthFactor) = GenericLogic.calculateUserAccountData(
      user,
      _reserves,
      _usersConfig[user],
      _reservesList,
      _reservesCount,
      _addressesProvider.getPriceOracle()
    );

    //if the user hasn't borrowed the specific currency defined by asset, it cannot be liquidated
    (vars.userStableDebt, vars.userVariableDebt) = Helpers.getUserCurrentDebt(
      user,
      principalReserve
    );

    (vars.errorCode, vars.errorMsg) = ValidationLogic.validateLiquidationCall(
      collateralReserve,
      principalReserve,
      userConfig,
      vars.healthFactor,
      vars.userStableDebt,
      vars.userVariableDebt
    );

    if (Errors.CollateralManagerErrors(vars.errorCode) != Errors.CollateralManagerErrors.NO_ERROR) {
      return (vars.errorCode, vars.errorMsg);
    }

    vars.collateralAtoken = IAToken(collateralReserve.aTokenAddress);

    vars.userCollateralBalance = vars.collateralAtoken.balanceOf(user);

    vars.maxPrincipalAmountToLiquidate = vars.userStableDebt.add(vars.userVariableDebt).percentMul(
      LIQUIDATION_CLOSE_FACTOR_PERCENT
    );

    vars.actualAmountToLiquidate = purchaseAmount > vars.maxPrincipalAmountToLiquidate
      ? vars.maxPrincipalAmountToLiquidate
      : purchaseAmount;

    (
      vars.maxCollateralToLiquidate,
      vars.principalAmountNeeded
    ) = _calculateAvailableCollateralToLiquidate(
      collateralReserve,
      principalReserve,
      collateral,
      principal,
      vars.actualAmountToLiquidate,
      vars.userCollateralBalance
    );

    //if principalAmountNeeded < vars.ActualAmountToLiquidate, there isn't enough
    //of collateral to cover the actual amount that is being liquidated, hence we liquidate
    //a smaller amount

    if (vars.principalAmountNeeded < vars.actualAmountToLiquidate) {
      vars.actualAmountToLiquidate = vars.principalAmountNeeded;
    }

    //if liquidator reclaims the underlying asset, we make sure there is enough available collateral in the reserve
    if (!receiveAToken) {
      uint256 currentAvailableCollateral = IERC20(collateral).balanceOf(
        address(vars.collateralAtoken)
      );
      if (currentAvailableCollateral < vars.maxCollateralToLiquidate) {
        return (
          uint256(Errors.CollateralManagerErrors.NOT_ENOUGH_LIQUIDITY),
          Errors.NOT_ENOUGH_LIQUIDITY_TO_LIQUIDATE
        );
      }
    }

    //update the principal reserve
    principalReserve.updateState();

    principalReserve.updateInterestRates(
      principal,
      principalReserve.aTokenAddress,
      vars.actualAmountToLiquidate,
      0
    );

    if (vars.userVariableDebt >= vars.actualAmountToLiquidate) {
      IVariableDebtToken(principalReserve.variableDebtTokenAddress).burn(
        user,
        vars.actualAmountToLiquidate,
        principalReserve.variableBorrowIndex
      );
    } else {
      //if the user does not have variable debt, no need to try to burn variable
      //debt tokens
      if (vars.userVariableDebt > 0) {
        IVariableDebtToken(principalReserve.variableDebtTokenAddress).burn(
          user,
          vars.userVariableDebt,
          principalReserve.variableBorrowIndex
        );
      }
      IStableDebtToken(principalReserve.stableDebtTokenAddress).burn(
        user,
        vars.actualAmountToLiquidate.sub(vars.userVariableDebt)
      );
    }

    //if liquidator reclaims the aToken, he receives the equivalent atoken amount
    if (receiveAToken) {
      vars.collateralAtoken.transferOnLiquidation(user, msg.sender, vars.maxCollateralToLiquidate);
    } else {
      //otherwise receives the underlying asset

      //updating collateral reserve
      collateralReserve.updateState();
      collateralReserve.updateInterestRates(
        collateral,
        address(vars.collateralAtoken),
        0,
        vars.maxCollateralToLiquidate
      );

      //burn the equivalent amount of atoken
      vars.collateralAtoken.burn(
        user,
        msg.sender,
        vars.maxCollateralToLiquidate,
        collateralReserve.liquidityIndex
      );
    }

    //transfers the principal currency to the aToken
    IERC20(principal).safeTransferFrom(
      msg.sender,
      principalReserve.aTokenAddress,
      vars.actualAmountToLiquidate
    );

    emit LiquidationCall(
      collateral,
      principal,
      user,
      vars.actualAmountToLiquidate,
      vars.maxCollateralToLiquidate,
      msg.sender,
      receiveAToken
    );

    return (uint256(Errors.CollateralManagerErrors.NO_ERROR), Errors.NO_ERRORS);
  }

  /**
   * @dev calculates how much of a specific collateral can be liquidated, given
   * a certain amount of principal currency. This function needs to be called after
   * all the checks to validate the liquidation have been performed, otherwise it might fail.
   * @param collateralAddress the collateral to be liquidated
   * @param principalAddress the principal currency to be liquidated
   * @param purchaseAmount the amount of principal being liquidated
   * @param userCollateralBalance the collatera balance for the specific collateral asset of the user being liquidated
   * @return collateralAmount the maximum amount that is possible to liquidated given all the liquidation constraints (user balance, close factor)
   * @return principalAmountNeeded the purchase amount
   **/
  function _calculateAvailableCollateralToLiquidate(
    ReserveLogic.ReserveData storage collateralReserve,
    ReserveLogic.ReserveData storage principalReserve,
    address collateralAddress,
    address principalAddress,
    uint256 purchaseAmount,
    uint256 userCollateralBalance
  ) internal view returns (uint256, uint256) {
    uint256 collateralAmount = 0;
    uint256 principalAmountNeeded = 0;
    IPriceOracleGetter oracle = IPriceOracleGetter(_addressesProvider.getPriceOracle());

    AvailableCollateralToLiquidateLocalVars memory vars;

    vars.collateralPrice = oracle.getAssetPrice(collateralAddress);
    vars.principalCurrencyPrice = oracle.getAssetPrice(principalAddress);

    (, , vars.liquidationBonus, vars.collateralDecimals, ) = collateralReserve
      .configuration
      .getParams();
    vars.principalDecimals = principalReserve.configuration.getDecimals();

    //this is the maximum possible amount of the selected collateral that can be liquidated, given the
    //max amount of principal currency that is available for liquidation.
    vars.maxAmountCollateralToLiquidate = vars
      .principalCurrencyPrice
      .mul(purchaseAmount)
      .mul(10**vars.collateralDecimals)
      .div(vars.collateralPrice.mul(10**vars.principalDecimals))
      .percentMul(vars.liquidationBonus);

    if (vars.maxAmountCollateralToLiquidate > userCollateralBalance) {
      collateralAmount = userCollateralBalance;
      principalAmountNeeded = vars
        .collateralPrice
        .mul(collateralAmount)
        .mul(10**vars.principalDecimals)
        .div(vars.principalCurrencyPrice.mul(10**vars.collateralDecimals))
        .percentDiv(vars.liquidationBonus);
    } else {
      collateralAmount = vars.maxAmountCollateralToLiquidate;
      principalAmountNeeded = purchaseAmount;
    }
    return (collateralAmount, principalAmountNeeded);
  }
}